Chemical Monitoring Modules
| Parameter | CODMn | Ammonia Nitrogen | Total Phosphorus | Total Nitrogen |
|---|---|---|---|---|
| Measurement Principle | Potassium permanganate oxidation titration | Salicylate spectrophotometry | Ammonium molybdate spectrophotometry | UV spectrophotometry following alkaline potassium persulfate oxidation |
| Measurement Range | 0–10 / 20 mg/L | 0–2 / 10 / 50 mg/L | 0–2 / 10 mg/L | 0–10 / 50 / 100 mg/L |
| 准确度 | ±5% F.S. | Standard solution at 20% of the measurement range: within ±8% Standard solution at 50% of the measurement range: within ±5% Standard solution at 80% of the measurement range: within ±3% | ±5% F.S. | Standard solution at 20% of full scale: within ±10% Standard solution at 50% of full scale: within ±8% Standard solution at 80% of full scale: within ±5% |
| Repeatability | ≤5% | ≤2% | ≤5% | ≤5% |
| Measurement Time | <60 minutes | <30 minutes | <45 minutes | <50 minutes |
整机技术参数
| Category | Parameter | Specification |
|---|---|---|
| Measurement & Operation | Overall System Analysis Cycle | <90 minutes |
| Measurement Modes | Interval measurement (user-selectable from 0–9,999 minutes); scheduled measurement at selected hours over a 24-hour cycle; single measurement; externally triggered measurement | |
| Communication | Communication Interfaces | RS-232 / RS-485 with standard Modbus protocol; Ethernet port |
| Operation & Data Management | Display & Control System | 15-inch operator display with a Windows-based control system; front and rear touchscreens for information display and command input |
| Display & Controls | Displays measurement, idle, fault, and maintenance states; provides component-fault, overrange, limit-exceedance, and low-reagent alarms | |
| Status Display & Alarms | Records analysis-process logs; stores more than five years of raw measurement data and operating logs | |
| Data Logging & Storage | Automatically saves data during a power failure; resumes operation after a fault reset or power restoration | |
| Power-Loss Protection & Automatic Recovery | Three-level user access control | |
| Installation & Operating Conditions | User Access Control | Recommended ambient temperature: −5°C to 55°C |
| Environmental Requirements | AC(220 ±22)V;(50 ±0.5)Hz | |
| Power Supply | <2,000 W | |
| Power Consumption | 1,320 × 714 × 1,880 mm (excluding protruding components such as the air conditioner) | |
| IP Rating | ≥IP55 |
Configuration
| Standard Configuration | Optional Configuration |
|---|---|
| - Rain shelter and task lighting - External auxiliary interfaces - Thermally insulated enclosure - Smoke alarm - Water sample pretreatment unit - Temperature-controlled air conditioner - Communication line surge protection - Five-parameter flow cell - Reagent storage refrigerator - Electronic lock with card access and mechanical key override - Proportionally sized reagent bottles - Industrial control and display system - Air-cleaning system - Liquid-leak alarm - 4G communication module | - Electronic lock with facial recognition - Ozone system - Uninterruptible power supply (UPS) - Voltage-stabilized power supply - Pressurized tap-water cleaning system - Groundwater sampling unit - Quality-control module with automatic standard solution preparation and water sample spiking - Automatic sample retention module for limit exceedances |





Henan Public Network Security Registration No. 41077102000244





