| Category | Parameter | Specification |
|---|---|---|
| Measurement Principle & Performance | Measurement Principle | TPPS4 spectrophotometry |
| Measurement Range | 0–0.2 mg/L;0–1 mg/L;0–2 mg/L | |
| Limit of Detection (LOD) | ≤0.005 mg/L | |
| Indication Error | At concentrations ≤0.04 mg/L: ±0.005 mg/L At concentrations ≥0.04 mg/L: ±10% | |
| Repeatability | ≤5% | |
| Zero Drift | ±5% | |
| Span Drift | ±10% | |
| Measurement Time | <50 minutes | |
| Measurement & Quality Control | Measurement Modes | Interval measurement (user-selectable from 0–9,999 minutes); scheduled measurement at selected hours over a 24-hour cycle; single measurement; externally triggered measurement |
| Calibration & Quality Control | Manual calibration; scheduled automatic calibration; automatic verification using standard solutions at user-defined times | |
| Communication & Signals | Communication Interfaces | RS-232;RS-485;RJ45 |
| Analog Signal | 4–20 mA | |
| Digital Inputs / Outputs | 2 digital outputs; 2 digital inputs | |
| Operation & Data Management | Regulatory Platform Integration | TFT full-color LCD touchscreen for display and command input |
| Display & Controls | Displays measurement, idle, fault, and maintenance states; provides fault, overrange, limit-exceedance, and low-reagent alarms | |
| Status Display & Alarms | Records instrument operations; stores at least one year of raw measurement data and operating logs | |
| Data Logging & Storage | Automatically saves data during a power failure; resumes operation after a fault reset or power restoration | |
| Power-Loss Protection & Automatic Recovery | Three-level user access control | |
| Installation & Operating Conditions | User Access Control | Recommended ambient temperature: 5–40°C; relative humidity: ≤85%, non-condensing |
| Environmental Requirements | 220 ±22 V AC;50 ±0.5 Hz | |
| Power Supply | ≤150 W | |
| Power Consumption | 600 × 450 × 1,555 mm |





Henan Public Network Security Registration No. 41077102000244





